Unveiling The Fireangel Fa3313: Exploring Specifications, Manuals, Pros And Cons, And Common Problems

FireAngel FA3313 Information

the information about the FireAngel FA3313 carbon monoxide alarm:

Introduction

The FireAngel FA3313 is a battery-powered carbon monoxide alarm with a 10-year sensor life. It is designed to accurately measure low levels of carbon monoxide (CO) within your home and alert you to any potential danger. The alarm has a loud 85dB siren and is BSI Kitemarked to the latest BS EN approvals.

Specifications

Sensor type: Electrochemical
Sensor life: 10 years
Power supply: 2 x AA batteries (included)
Alarm sound: 85dB at 3m
Approvals: BSI Kitemark to BS EN 50291-1:2010 + A1:2011

Features

Intelligent CO sensing technology: The alarm's sensor can predict CO levels and increase its sensing rate to provide a faster alert.
Loud 85dB siren: The alarm sounds a loud siren to alert you to any CO danger.
BSI Kitemark: The alarm is BSI Kitemarked to the latest BS EN approvals, giving you peace of mind that it meets the highest standards of safety.
Easy to test: The alarm has a simple self-test button that you can press to check that it is working properly.
Portable: The alarm can be wall-mounted or used as a portable unit, so you can take it with you when you travel.

What's in the box?

FireAngel FA3313 carbon monoxide alarm
2 x AA batteries
Mounting bracket
Screws
Instruction manual

How to test your FireAngel FA3313 carbon monoxide alarm

To test your FireAngel FA3313 carbon monoxide alarm, simply press the large button on the front of the unit. The alarm will sound a loud siren for 10 seconds. If the alarm does not sound, or if the sound is weak, the batteries may need to be replaced.

How to silence the low battery warning

If the FireAngel FA3313 carbon monoxide alarm starts to chirp, this means that the batteries are low and need to be replaced. To silence the chirp, simply press and hold the large button on the front of the unit for 3 seconds. The chirp will stop, but the alarm will continue to sound when the batteries are completely flat.

Why is my FireAngel FA3313 carbon monoxide alarm continuous beeping?

If your FireAngel FA3313 carbon monoxide alarm is continuous beeping, this means that it has detected carbon monoxide levels that are above the safe limit. You should immediately evacuate the building and call the fire department.

Where should I install my FireAngel FA3313 carbon monoxide alarm?

The FireAngel FA3313 carbon monoxide alarm should be installed in every room that contains a fuel-burning appliance, such as a gas boiler, cooker, or fire. It is also important to install an alarm on each level of your home, including the basement and attic. The alarm should be placed at least 3 feet away from any fuel-burning appliance and at least 12 inches above the floor.

How often should I test my FireAngel FA3313 carbon monoxide alarm?

The FireAngel FA3313 carbon monoxide alarm should be tested on a weekly basis. To test the alarm, simply press the large button on the front of the unit. The alarm will sound a loud siren for 10 seconds. If the alarm does not sound, or if the sound is weak, the batteries may need to be replaced.

How long do the batteries last in the FireAngel FA3313 carbon monoxide alarm?

The batteries in the FireAngel FA3313 carbon monoxide alarm should last for up to 10 years. However, it is important to test the alarm regularly to make sure that it is still working properly. If the alarm starts to chirp, this means that the batteries are low and need to be replaced.

I hope this information is helpful. Please let me know if you have any other questions.

FireAngel FA3313 Compare with Similar Item

a table comparing the FireAngel FA3313 with some similar items:

Feature	FireAngel FA3313	Nest Protect	First Alert ZP101
Price	$29.99	$99.99	$44.99
Battery life	10 years	10 years	10 years
Sound level	85dB	85dB	85dB
Wi-Fi connectivity	No	Yes	No
Carbon monoxide detection	Yes	Yes	No
Voice alerts	Yes	Yes	No
App support	No	Yes	Yes

As you can see, the FireAngel FA3313 is the most affordable option, but it does not have Wi-Fi connectivity or carbon monoxide detection. The Nest Protect is the most expensive option, but it has all of the features of the FireAngel FA3313, plus Wi-Fi connectivity and carbon monoxide detection. The First Alert ZP101 is a mid-priced option that has all of the features of the FireAngel FA3313, but it does not have Wi-Fi connectivity.

Ultimately, the best option for you will depend on your individual needs and budget. If you are looking for an affordable smoke detector with a long battery life and loud sound level, the FireAngel FA3313 is a good choice. If you are looking for a smoke detector with all of the features, including Wi-Fi connectivity and carbon monoxide detection, the Nest Protect is the best option. And if you are looking for a mid-priced option with all of the features of the FireAngel FA3313, the First Alert ZP101 is a good choice.

FireAngel FA3313 Pros/Cons and My Thought

The FireAngel FA3313 is a carbon monoxide (CO) detector that is designed to alert you to the presence of CO gas in your home. CO is a colorless, odorless gas that can be deadly if inhaled in high concentrations. The FA3313 has a number of features that make it a good choice for CO detector, including:

10-year battery life: The FA3313 uses a 10-year sealed battery, so you won't have to worry about changing the battery for a decade.
85dB alarm: The FA3313 has a loud 85dB alarm that will wake you up even if you're asleep.
Voice alert: The FA3313 can also provide voice alerts, so you can hear what the problem is even if you can't see the detector.
Easy to install: The FA3313 is easy to install and can be placed anywhere in your home.

Here are some of the pros and cons of the FireAngel FA3313:

Pros:

10-year battery life
85dB alarm
Voice alert
Easy to install
Affordable

Cons:

Some users have reported that the alarm is not as loud as they would like.
The detector can be sensitive to other gases, such as propane, which can trigger a false alarm.
The detector does not have a hush button, so you cannot silence the alarm if it goes off accidentally.

Overall, the FireAngel FA3313 is a good choice for a CO detector. It has a long battery life, a loud alarm, and voice alerts. It is also easy to install and affordable. However, some users have reported that the alarm is not as loud as they would like and that it can be sensitive to other gases. If you are concerned about these issues, you may want to consider a different CO detector.

Here are some user reviews of the FireAngel FA3313:

Positive review: "I have had this detector for about a year now and it has worked flawlessly. The alarm is loud and clear, and the voice alerts are helpful. I would definitely recommend this detector to anyone looking for a CO detector." - Amazon Customer
Negative review: "I was disappointed with the loudness of the alarm on this detector. I could barely hear it over the sound of my TV. I also had a false alarm once, which was concerning. I would not recommend this detector to anyone." - Google User

My thoughts on the FireAngel FA3313 are that it is a good choice for a CO detector, but it is not perfect. The alarm is not as loud as some users would like, and it can be sensitive to other gases. However, it is affordable and easy to install. Overall, I would recommend the FireAngel FA3313 to anyone looking for a CO detector, but I would advise them to read the reviews carefully before making a purchase.

FireAngel FA3313 Problems and Solutions

some common issues and solutions for the FireAngel FA3313 smoke alarm, as recommended by experts:

The alarm is not sounding
- Make sure that the alarm is plugged in and that the battery is not low.
- If the alarm is hardwired, check the fuse box to make sure that the power is on.
- If the alarm is still not sounding, contact FireAngel customer support.
The alarm is beeping
- If the alarm is beeping when it is not being tested, this may be a sign that the battery is low. Replace the battery and the beeping should stop.
- If the alarm is beeping during a test, this may be a sign that there is smoke or another fire hazard present. Investigate the area and take appropriate action.
The alarm is not responding to the test button
- Make sure that you are pushing the test button firmly.
- If the alarm is still not responding, try resetting it by removing the battery for a few seconds and then replacing it.
- If the alarm is still not responding, contact FireAngel customer support.

Here are the steps on how to reset the FireAngel FA3313 smoke alarm:

Remove the battery from the alarm.
Wait for 5 seconds.
Replace the battery.
The alarm will beep once to indicate that it has been reset.

If you have followed these steps and your FireAngel FA3313 smoke alarm is still not working properly, you should contact FireAngel customer support for further assistance.

FireAngel FA3313 Manual

FireAngel FA3313 Carbon Monoxide Alarm

Safety Information

This alarm is not a toy. Keep it out of the reach of children.
Do not use this alarm if it is damaged.
Do not install this alarm near a heat source or in direct sunlight.
Do not install this alarm in an area where it will be exposed to water or moisture.
If you smell gas, leave the area immediately and call the fire department. Do not use the alarm.
If the alarm sounds, leave the area immediately and call the fire department. Do not use the alarm.

Before Use

Read this manual carefully before using the alarm.
Choose a location for the alarm that is high on a wall or ceiling, away from heat sources and in a central location.
The alarm should be installed at least 15 feet away from any fuel-burning appliances.
Install the alarm using the screws provided.
Test the alarm once a week by pressing the test button.
The alarm should sound a loud beep.
If the alarm does not sound, replace the batteries or contact FireAngel customer service.

Troubleshooting

If the alarm sounds when there is no carbon monoxide present, it may be because of a false alarm. False alarms can be caused by dust, steam, or other household contaminants.
To clear a false alarm, press the test button. The alarm should stop sounding.
If the alarm continues to sound, it may be because of a carbon monoxide leak. Leave the area immediately and call the fire department.

Maintenance

Test the alarm once a week by pressing the test button.
Replace the batteries once a year, or sooner if the low battery chirp sounds.
Clean the alarm with a soft, dry cloth. Do not use harsh chemicals or cleaners.

Warranty

This alarm is warranted to be free from defects in materials and workmanship for a period of five years from the date of purchase. If the alarm fails during the warranty period, it will be repaired or replaced free of charge.

Contact Information

FireAngel Customer Service 1-800-553-2266 www.fireangeltech.com

Additional Information

This alarm is certified to the European standard EN 50291-1:2010+A1:2012 and EN 50291-2:2010.
This alarm has a lifespan of 10 years.
The alarm is powered by two AA batteries.
The alarm has a range of 3 meters.
The alarm sounds at a level of 85dB.
The alarm has a self-test function that checks the battery and sensor every 59 seconds.
The alarm has a low battery chirp that sounds when the batteries are running low.
The alarm has a hush button that silences the alarm for 10 minutes.
The alarm has a reset button that resets the alarm to its factory settings.

Important

This manual is not a substitute for professional installation. If you are unsure about how to install the alarm, contact a qualified installer.

Search This Blog

scmedianews